Depending on the setup of the machine, connect either one or two Ethernet wires.

In the course of the product's service life, the adjustment should only be necessary once.

It is important to position the bracket such that the DC-37 pin connector connecting the I/O pack and the terminal board is not subjected to right-angle forces.

The studs slip into a mounting bracket made for the particular style of the terminal board.

Using the threaded studs next to the Ethernet ports, mechanically fasten the I/O pack(s).

Directly connect the PAOC I/O pack(s) to the connector on the terminal board (s).

Mount the selected terminal board firmly.

Only the analog output terminal boards TBAOH1C and STAOH1A/H2A indicated in the accompanying table are compatible with the PAOC.

The controlST* Software Suite V04.06 and later supports the functionally compatible BPPC found in the PAOCH1B.

There is a BPPB processor board within the PAOCH1A.

One of the following BPPx processor boards is compatible with the PAOC I/O pack: Indicator LEDs are used to display visual diagnostics. The related terminal board connector is directly connected to the output via a DC-37 pin connector. Dual RJ-45 Ethernet connectors and a three-pin power input serve as the PAOC's inputs. Up to eight simplexes, 0-20 mA current loop outputs can be provided by the PAOC, which also has an analog to digital converter for each output's current feedback. A BPPx processor board and an acquisition board pair tailored to the analog output function are both present in the PAOC. An electrical interface between one or two I/O Ethernet networks and an analog output terminal board is provided by the Analog Output (PAOC). IS220PAOCH1A is an Analog Output Module manufactured by General Electric as part of Mark VIe used in gas turbine control management systems. Number of channels: Eight current output channelsĪccuracy: ☐.5% over -30 to 65oC (-22 to 149 oF) temperature

Ge analog to digital converter box